Typical Phoenix Price
Most standard 1000 sq ft concrete driveways fall within the $200-$450 range, with plain broom-finish concrete generally nearer the lower end.
Guides
How Much Does It Cost to Pressure Wash 1,000 Square Feet of Driveway?
For a 1000-square-foot driveway in Phoenix, Phoenix Pressure Washers typically expects pressure washing to cost $200-$450, depending on the concrete finish, staining, and whether sealing is added. Knowing the surface condition and included prep work helps explain why two driveways with the same area can receive different quotes.
Quick Summary
- A standard 1000 sq ft concrete driveway in Phoenix typically costs $200-$450 to pressure wash, or about $0.20-$0.45 per square foot.
- Minimum service charges commonly run $125-$175; oil, rust, aggregate, stamped concrete, or years of buildup can move the total higher.
- A 1000 sq ft driveway usually takes 1-3 hours; 2000 PSI may handle light dust but often needs help from hot water or a surfactant on tougher marks.
- Sealing after cleaning is separate and generally adds $0.20-$0.40 per square foot for material and labor.
Three Things Behind the Price
Surface and Stain Load
Oil, rust, tire rubber, and years of buildup require more pretreatment and passes, while stamped or exposed aggregate surfaces need a slower, lower-pressure approach.
Quote Scope
Confirm whether the quote includes oil and rust pretreatment, the pressure-washing pass, and rinse-down of adjacent walkways; sealing should appear as a separate add-on.
Driveway Conditions to Compare
Light Dust on Broom-Finish Concrete
A plain concrete driveway with light desert dust and uncomplicated access. This is the condition most likely to clean near the lower end of the range.
Oil and Tire Marks at the Garage Entry
Concentrated oil drips and tire-rubber transfer where vehicles park. These stains often require degreaser dwell time and multiple cleaning passes.
Stamped and Exposed Aggregate Texture
The deeper texture where dust and oil settle between raised details. A careful lower-pressure pass and longer cleaner dwell time help protect the finish.
1000-Square-Foot Driveway Snapshot
Base Concrete Cleaning
For standard broom-finish concrete, base cleaning generally lands between $200 and $300 before stain treatment or textured-surface adjustments.
Stain Pretreatment
Moderate oil or rust spot pretreatment commonly adds $50-$100 because degreaser dwell time and extra passes increase labor.
Textured Surface Adjustment
Aggregate or stamped concrete commonly adds $50-$150 because cleaning requires slower passes, lower pressure, longer dwell time, and specialized nozzle selection.
Sealing a Larger Driveway
For a 1500 sq ft driveway, sealing after cleaning typically costs $300-$600, based on $0.20-$0.40 per square foot for sealer and labor; crack filling or extra prep can raise it.
Phoenix Driveway Cost Comparison
Phoenix Driveway Cleaning Cost Breakdown
| Driveway condition or service | Typical price effect | What changes the work |
|---|---|---|
| Standard broom-finish concrete | $200-$300 base cleaning | Light dust and straightforward equipment access |
| Moderate oil or rust treatment | Add $50-$100 | Degreaser or rust pretreatment and extra passes |
| Aggregate or stamped surface | Add $50-$150 | Slower passes, lower pressure, and longer cleaner dwell time |
| Heavy buildup, paint, or graffiti | Toward $450 or higher | More intensive chemical treatment and labor |
| Sealing after cleaning | Add $0.20-$0.40 per sq ft | Sealer grade, crack filling, and surface preparation |
What a Driveway Quote Covers
A 1000 sq ft slab is roughly a two-car driveway with an apron, but area is only the starting point. The quote also reflects labor time, water volume, detergent or degreaser, equipment access, and the pressure needed for the surface. Mobile service may require water tanks and containment when hose-bib pressure is insufficient, so the scope should state the pretreatment, washing, rinse, and runoff handling included.
Factors That Move the Price Higher
Circular driveways, RV pads, narrow side-yard sections, and gated properties add setup and hose-management time. Phoenix's average area rainfall is under 8 inches annually, so sun-baked dust, tire rubber, and hard-water mineral deposits are more common concerns than algae; monsoon season from June through September can increase dust and debris. Commercial lots also differ from residential driveways because their scale, oil saturation, and runoff requirements change the equipment and pricing method.
Common Follow-Up Questions
A standard 1000 sq ft wash takes about 1-2 hours, with heavier buildup or aggregate surfaces closer to 3 hours; drying can take 30 minutes to a couple of hours in Phoenix's dry heat. While 2000 PSI can handle light dust, tougher oil, rust, and ground-in grime commonly call for 3000-4000 PSI with a rotating surface cleaner, hot water, or degreasing pretreatment. Most Phoenix driveways benefit from cleaning once or twice a year, usually in spring with an optional post-monsoon cleaning in early fall, and a driveway bundled with patio or sidewalk work may be scheduled as a half-day appointment.
Plan the Scope
Need a Driveway Quote for Your Surface?
Share the driveway area, concrete finish, visible oil, rust, or tire marks, access details, and whether you want sealing priced separately. Those details make it easier to compare what each estimate includes.